IN A WORLD OF SHORTCUTS, WE DON'T™
Welding Stations
Most welding booth ventilation systems require ducting, wall penetrations, and a cement pour before the equipment even goes in. Welding stations skip all of that — filtration is built directly into the booth, so there’s nothing to install beyond the unit itself. For the full lineup of enclosure and extraction options, see our Welding Booths & Fume Extraction line.
Self-Contained, Plug-and-Play Installation
Each welding station delivers 4,000 CFM of airflow through a self-contained ductless design — position the unit, connect power, and it’s ready to weld. Available in single or dual booth configurations to match your space.
Lower Cost Per Student
A typical ducted lab system requires ducting, installation labor, cement pour, and wall penetrations on top of the equipment cost. Eliminating that infrastructure brings the cost per student down significantly while improving the extraction quality at each station.
Standard VFD Airflow Control
Every unit includes a variable frequency drive as standard, letting you increase or decrease airflow power on demand rather than running at a single fixed setting. Beyond the flexibility, this cuts real electricity cost — the U.S. Department of Energy notes that motor and fan systems account for a large share of industrial electricity use, and even modest speed reductions on a VFD-controlled motor can cut energy draw substantially compared to running at full, fixed speed.
Built to Move With Your Facility
Ducted systems are permanent — expanding or reconfiguring a facility built around fixed ductwork gets expensive fast. Welding stations can be relocated or added to simply by moving or purchasing additional units, no re-ducting required.
Heavy-Duty Construction
Built from 12-gauge, powder-coated steel — the same gauge used across our welding booth kits — for durability in daily training and production use.
Additional Information:
Meeting Fume Exposure Standards
OSHA’s general industry standard for welding fume exposure is 5 mg/m³, though many manufacturers now target internal limits as low as .02 mg/m³. Because filtration is built into the unit, welding stations are engineered to hit that lower end without needing a separately specified dust collector — see our Welding Booth Kits if you’d rather engineer the ducting and collector yourself, or our Welding Booth Curtains for a lower-cost curtain-based enclosure.
A welding station has filtration built into the unit itself — no ducting, wall penetrations, or cement pour required. A ducted booth is a structural shell that pairs with separately installed ducting and a dust collector.
4,000 CFM per unit, with standard VFD control to adjust airflow power as needed.
Yes. Since there’s no permanent ducting, you can add or relocate units as your layout changes, rather than re-engineering a ducted system.
Yes, single or dual booth configurations are available depending on your space and student count.
