| |
|
Machine Dust Covers
|
Are Oil, Dirt, and Dust Causing Machinery Damage and Costly Repairs? See How You Can Stop Harmful Damage to Your Equipment in a Cost Effective Package.
Problems with dust, dirt,and oil causing production problems and even accidents in your plant ? Not to mention costly repairs on your machinery? If these are problems your repeatedly encountering then there is no need to put up with this aggravation when there is a simple cost effective solution.
The cold hard fact is these kinds of problems can easily be avoided with proper protection using custom vinyl covers. If your covering machines, equipment, salvaged items, or waste STEEL-SCRIM vinyl provides an excellent cover for these
situations. The same tough as nails vinyl used in our industrial curtain products is also used in our custom covers.
About STEEL-SCRIM vinyl
Why Available vinyls Cannot Meet All Our Requirements
We know you're aware of some cover materials that are far from ideal in covering salvage, equipment, and machinery.and we also know that your opinion of them might not be a favorable one.
You're right: the cold, hard fact is that many covers are not made of a strong enough vinyl or material. Which is why we were determined to find a better solution for you. The head of our research and development team set out to find the best vinyl possible. He investigated over 20 different suppliers and just as many varieties of vinyl. Four months worth of exhaustive research.
But after all that searching and testing, all he found was vinyl that
- lacked adequate finish to provide proper protection
- had weak scrim strengths resulting in low durability
- contained lead which resulted in poor flame-resistance tests, sure to get the attention of fire marshals or OSHA inspectors.
We were beginning to think we'd have give up on a finding a vinyl that would satisfy all your requirements, for a cost that would give you a great return-on-investment.
But instead of giving up, we decided to design our own… and what we discovered in an odd looking design would allow us to shatter the previous limits of vinyl strength and tenacity.
How We Created a vinyl that would Meet All Your Needs. A vinyl Strong Enough to Earn the Name STEEL-SCRIM
We started by spec-ing out a "super vinyl". A vinyl that would
- boast an R-value of 1.14 or higher, high enough to guarantee you energy savings (for use in warehouse dividers)
- meet the strictest of codes for flame resistance including CFM, NFPA-701 and ASTM E-84 class 1 protecting you from fines
- protect against mildew
- protect against harmful chemicals
- protect against UV rays
- protect against heat up to 200 degrees <
- provide cold crack resistance down to -20 degrees
- provide the highest tensile and tear strength on the market
- be affordable enough to give you an attractive ROI.
Obviously, this wasn't going to be easy. The biggest problem our engineering department faced was the poor scrim strength of most of the vinyl on the market. There were a handful of strong vinyls available but they were prohibitively expensive. To create a tougher, longer-lasting curtain, we had to somehow increase the scrim's tensile and tear strength because ninety-five percent of a vinyl's tensile and tear strength comes from the scrim.
To achieve this, our engineering department created something completely unique. A tri-lateral (three-directional) polyester scrim design. It may look odd compared to traditional vinyl patterns, but it was cost-effective and, most importantly, boosted the tensile strength of the vinyl to over 406 pounds per square inch. That's more than EIGHTY-FOUR PERCENT stronger than a standard 9x9 denier 1000 row scrim!
|
|
|
This is the strongest scrim we know of, and quite possibly the strongest scrim ever created. It's so strong that this 16-ounce vinyl out-performs standard 18-ounce, 22-ounce, even 26-ounce vinyl! It's stronger, more resilient, and meets fire codes standards that the other vinyls can't match. So strong is this scrim design that the U.S. Armed Forces use it in their bullet-proof vests. Thus the name, STEEL-SCRIM. We can safely say that curtains made of this scrim will
- protect you from OSHA and Fire Marshall citations (CFM, NFPA-701, ATSM E-84 class I)
- protect machinery and equipment from damage.
- satisfy your stringent requirements, for tolerance to abuse (406 lbs. of tensile strength!)
- resist tears. The advanced, proprietary tri-lateral design causes the vinyl to bunch up and collapse upon itself when punctured, automatically resealing itself.
- resist water damage
- resist mildew
- resist UV rays
- resist rot
- resist most chemicals (even caustic acid!)
Finally, not only did we surpass all the requirements we set for your vinyl, we are so confident in our construction methods (see below) that we offer an industry-leading THREE YEAR WARRANTY on the construction. (see details)
How to Order
Our professional sales staff is available to assist you from 8am -5pm Eastern Standard time to put together a complete curtain system to fit your specific application needs. Our Steel-Guard Covers
| Keep dirt, oil, and contaminant contained
Keep machinery and equipment from damage from
Protect your workers and equipment from costly injuries and damage. |
Call 1-800-347-8368 to be connected with a sales professional or use our request a quote form and email your dimensions, and information and a sales professional will contact you with in 24 hours. Custom covers can be designed in about any dimension with options such as adding Velcro attachments, grommets, or D-rings.
 
|
|
|
|
|
